Edible chitosan-based Pickering emulsion coatings: Preparation, characteristics, and application in strawberry preservation.

The long-term application of plant essential oils in food preservation coatings is limited by their poor water solubility and high volatility, despite their recognized synergistic antimicrobial effects in postharvest fruit preservation. To overcome these limitations, a Pickering emulsion loaded with thyme essential oil (TEO) was developed by utilizing hydrogen bonding and electrostatic interactions to induce cross-linking of chitosan particles. This novel emulsion was subsequently applied in the postharvest storage of strawberries. The shear-thinning behavior (flow index <1) and elastic gel-like characteristics of the emulsion made it highly suitable for spray application. Regarding TEO release, the headspace concentration of TEO increased from 0.21 g/L for pure TEO to 1.86 g/L after two instances of gas release due to the stabilizing effect of the chitosan particles at the oil-water interface. Notably, no phase separation was observed during the 10-day storage of the emulsion. Consequently, the emulsion was successfully employed for the postharvest storage of strawberries, effectively preventing undesirable phenomena such as weight loss, a decrease in firmness, an increase in pH, and microbial growth. In conclusion, the developed Pickering emulsion coating exhibits significant potential for fruit preservation applications, particularly for extending the shelf life of strawberries.

Carboxymethylcellulose-induced depletion attraction to stabilize high internal phase Pickering emulsions for the elderly: 3D printing and ß-carotene delivery.

In this study, a carboxymethylcellulose (CMC) induced depletion attraction was developed to stabilize high internal phase Pickering emulsions (HIPPEs) as age-friendly 3D printing inks. The results demonstrated that depletion force induced the adsorption of yolk particles at the droplet interface and the formation of osmotic droplet clusters, thereby increasing the stability of HIPPEs. In addition, the rheological properties and nutrient delivery properties of HIPPEs could be adjusted by the mass ratio of yolk/CMC. The HIPPEs stabilized at yolk/CMC mass ratio 20:7.5 showed optimal printability, viscoelastic, structural recovery, and swallowability. HIPPEs have been applied to 3D printing, International Dysphagia Dietary Standardization Initiative (IDDSI) test, and in vitro digestive simulation in the elderly, indicating their attractive appearance, safe swallowability, and enhanced bioaccessibility of ß-carotene. Our work provides new ideas for developing age-friendly foods with plasticity and nutrient delivery capacity by depletion attraction stabilizing HIPPEs.

Development of high internal phase Pickering emulsions stabilized by egg yolk and carboxymethylcellulose complexes to improve ß-carotene bioaccessibility for the elderly.

The work aimed to develop the multi-protein mixture of egg yolk as natural particles to stabilize high internal phase Pickering emulsions (HIPPEs) to improve the bioaccessibility of ß-carotene in the elderly. The results showed that the depletion attraction drove the adsorption of egg yolk protein particles at the oil-water interface and the formation of osmotic droplet clusters due to the attachment of particle-coated droplets in the dispersed phase, leading to kinetic blocking and stable gelation of HIPPEs. Rheological measurements showed that HIPPEs had shear thinning, low shear stress, viscoelastic properties, and structural recovery properties, which facilitated easy consumption for the elderly. The stability of HIPPEs was verified by ionic and centrifugal stability tests, demonstrating their potential for application to complex gastric environments. HIPPEs have been applied to the International Dysphagia Dietary Standardization Initiative (IDDSI) test and simulated in vitro digestion in older adults, demonstrating their safe swallowability and high ß-carotene bioaccessibility. Our findings suggest solutions for food practitioners facing the aging problem and provide new insights for preparing age-friendly foods.

3D Printing of smart labels with curcumin-loaded soy protein isolate.

A two-step method for preparing smart labels that can monitor food freshness through color change is presented. The conventional casting method for such labels is not cost-effective, as it uses organic solvents and requires additional cutting processes. Our method is more eco-friendly and customizable, as it uses water as the sole solvent and 3D printing as the fabrication technique. First, curcumin was encapsulated with soy protein isolate (SPI) by a pH-driven method involving hydrogen bonding and hydrophobic interactions. Subsequently, the SPI-curcumin complex was blended with gelatin to create a printable ink. The ink has suitable rheological properties for extrusion, with a yield stress of 400-600 Pa and a viscosity of 122.93-142.82 Pa·s at the optimal printing temperature. The complex modulus of the ink increases to above 2 × 103 Pa when cooled to 25 °C, indicating rapid gel formation. The application of these smart labels to minced meat demonstrated their ability to reflect its freshness by transitioning from yellow to red. Furthermore, the printability and mechanical properties of the labels can be adjusted by changing the glycerol/water ratio. This innovative approach is a promising solution for producing environmentally friendly and customizable smart labels for food freshness monitoring.

Effect of the substitution of butter by double cross-linked egg yolk granules/sodium alginate emulsion gel on properties of baking dough during frozen storage.

In this study, double cross-linked egg yolk granules (EYGs)/sodium alginate (SA) emulsion gel was constructed and used as butter substitute. The water binding capacity, rheology properties and microstructure of EYGs/SA emulsion gel showed that the network structure tended to be complete when the concentration of SA reached 1% (m/v). SA stabilized the EYGs/SA droplets and enhanced the spatial network structure of emulsion gel. After substitution for butter, the network structure of EYGs/SA emulsion gel with more water bounded and the polyhydroxy structure of SA molecules endowed dough with more water retention capacity. Meanwhile, the destruction of the microstructure of the replaced dough with EYGs/SA emulsion gel was significantly inhibited compared with the un-substituted dough after freezing. The baking ability results showed a satisfactory baking effect after substitution. Overall, this study provides a new avenue in the field of fat replacement and the application of EYGs/SA emulsion gels.

Preparation and in vitro evaluation of hesperidin nanoparticles by antisolvent recrystallization in a double homogenate system.

Hesperidin nanoparticles (HNPs) were made for the first time employing an antisolvent recrystallization technique in a double homogenate system with positive and negative clockwise rotation in order to completely use the underutilized nutritional components in citrus peel. Dimethyl sulfoxide (DMSO), ethanol, and deionized water were used as the solvents and antisolvents in the hesperidin solution preparation. Hesperidin solution concentration of 60.26 mg/mL, homogenization speed of 8257 rpm, antisolvent-to-solvent volume ratio of 6.93 mL/mL, and homogenization time of 3.15 min were the ideal experimental conditions. HNPs have to be at least 72.24 nm in size. The structures of the produced hesperidin samples and the raw hesperidin powder were identical, according to the findings of the FTIR, XRD, and TG characterization tests. The HNP sample had an in vitro absorption rate that was 5.63 and 4.23 times greater than that of the raw hesperidin powder, respectively. It was discovered that DMSO was more suited than ethanol for creating HNP particles. In the realms of dietary supplements, therapeutic applications, and health promotion, the HNPs produced by the ARDH technology would be a potential formulation on increasing uses for a wider range of nutraceuticals (synergistic).

Understanding the structure, interfacial properties, and digestion fate of high internal phase Pickering emulsions stabilized by food-grade coacervates: Tracing the dynamic transition from coacervates to complexes.

Although protein-polysaccharide complexes have shown tremendous potential in stabilizing high internal phase Pickering emulsions (HIPPEs), it is unclear whether coacervates have the same potential to be used as effective Pickering stabilizers. In this study, HIPPEs were prepared by ovalbumin (OVA)-pectin (PE) coacervates during the transition from coacervates to complexes. The results showed that enhanced OVA-PE interactions significantly affected the wettability and surface-tension reduction ability of the OVA-PE coacervates. At pH 2, the coacervate-stabilized HIPPEs exhibited smaller oil droplet sizes (21.3±2.3 µm), tighter droplet packing, and finer solid-like structures through the bridging of droplets and the generation of stronger gel-like network structures to prevent coalescence and lipid oxidation. The gastrointestinal digestion results proved that the OVA-PE coacervates promoted lipid hydrolysis and improved the bioaccessibility (from 19.7±0.7% to 36.5±2%) of curcumin-loaded HIPPEs. Our work provides new ideas for the development of biopolymer particles as effective Pickering stabilizers in the food industry.

Tuning egg yolk granules/sodium alginate emulsion gel structure to enhance ß-carotene stability and in vitro digestion property.

In this study, emulsion gels were constructed by ionic gelation method using egg yolk granules/sodium alginate bilayers emulsion. In particular, the main driving force of the emulsion gels was controlled by adjusting pH. Compared with pH 7.0, the mechanical properties of EYGs emulsion gel were enhanced at pH 4.0 (G' > G″). The interfacial protein aggregation that occurred at pH 4.0 promoted the compactness of the EYGs emulsion gel structure along with enhanced capillary effect. The emulsion gel structure tended to be complete at 1 % SA of pH 4.0, for the electrostatic interaction required more SA molecules involved in maintaining emulsion gel structural stability. The denser emulsion gel structure of pH 4.0 than pH 7.0 improved storage stability, FFA releasing, and chemical stability of ß-carotenes. Bioaccessibility of ß-carotenes also decreased to achieve sustained release. This study provides a theoretical basis for tuning emulsion gel structure to adjust encapsulation stability and in vitro digestion characteristics of active ingredients.

Development and characterization of high internal phase pickering emulsions stabilized by heat-induced electrostatic complexes particles: Growth nucleation mechanism and interface architecture.

In this work, the heat-induced ovalbumin (OVA)-pectin (PE) electrostatic complex particles (HIECP) prepared by different heating sequences (type I particles (I): Heat-treated ovalbumin/pectin complexes at pH 4; type II particles (II): Complexes between pre-heated ovalbumin and pectin at pH 4) and biopolymer ratios were used as stabilizers to form high internal phase Pickering emulsions (HIPPEs). The results showed that I had a more compact structure, higher net surface charge, and smaller particle size than II, due to the different growth nucleation mechanism. II-stabilized HIPPEs exhibited a smaller oil droplet size, stronger gel structure, and better stability than I-stabilized HIPPEs, owing to their suitable wettability, rigid "core-shell" structure, and robust and dense interface architecture. Moreover, the stability and gel-like structure of HIECP-stabilized HIPPEs improved with increasing PE content due to steric barrier and thickening effects. Our findings provide a new perspective for understanding heat-induced biopolymer particles as effective Pickering stabilizers.

Investigation of the formation mechanism and ß-carotene encapsulation stability of emulsion gels based on egg yolk granules and sodium alginate.

The formation mechanism of heat-induced egg yolk granules (EYGs)/sodium alginate (SA) emulsion gel was studied under pH 6.2 and 7.5. Particle size, water holding capacity, LF NMR, and protein solubility revealed that pH 7.5 increased the surface charge of EYGs and enhanced non-covalent interaction with SA, and hydrogen bonding dominated of the gel formation process. Microscopy and rheological analysis indicated that samples with 0.75% SA had the smallest particle size and highest G', with chain-like oil droplets. Excess SA (1%) led to depletion flocculation due to SA structural rearrangements around oil droplets caused by the increase in negatively charged, causing uneven network structure. The in vitro release property and storage stability of ß-carotene loaded in the EYGs/SA emulsion gel showed that SA increased storage stability and decreased bioaccessibility of ß-carotene with delayed digestion rate. These results provide a theoretical basis for the nutrient delivery system in gel foods.

Glycosylation of egg white protein with maltodextrin in the dry state: Changes in structural and gel properties.

The glycosylation of egg white proteins (EWP) with maltodextrin (MD) was investigated by monitoring their gel properties and protein structure. The improved gel properties of glycosylated EWP (GEWP) were confirmed by the increase in gel hardness, gel water holding capacity (WHC), rheological parameters, and finer gel microstructures. The protein structures were characterized by monitoring changes in the content of sulfhydryl (SH) group, circular dichroism (CD) and X-ray diffraction (XRD) spectra, and differential scanning calorimetry (DSC). The GEWP structures were unfolded due to extended glycosylation, as observed by increased content of exposed SH group and ß-sheet and decreased crystallinity, thermal denaturation temperature (Td), and enthalpy (ΔH). A correlation was also found between the gel properties and the protein structural changes. Overall, this study is beneficial for determining the mechanism of glycosylation and provides a convenient approach to improving the gel properties of EWP, which can further broaden the application of EWP in the food industry.

Genistein microparticles prepared by antisolvent recrystallization with low-speed homogenization process.

To create genistein particles, a brand-new antisolvent recrystallization technique was employed. The response surface approach was utilized to optimize the single factor test findings, which were acquired via the preliminary tests. The ideal liquid-to-liquid ratio was 9, the solution concentration was 21 mg/mL, the nozzle diameter was 700 µm, the feed rate was 39.65 mL/min, and the homogenization rate was 1500 rpm. The smallest mean particle size measured was 202.782 nm. SEM was used to study the powder's morphology, while thermal analysis and infrared imaging were used to evaluate its characteristics. The homogeneous antisolvent recrystallization method-prepared GMP has a better dissolving rate and stronger antioxidant activity when compared to genistein powder. The antisolvent recrystallization approach used in this study, which uses low-speed homogenizing instead of conventional grinding and homogenizing, can successfully reduce particle size, improve bioavailability, and use less energy. This topic may thus be made popular because it has real-world applications.

Molecular interactions in the dry heat-facilitated hydrothermal gel formation of egg white protein.

A comprehensive investigation was conducted regarding the molecular forces involved in the formation of dry heated egg white protein (DEWP) gels. From the preparation of DEWP powders to the formation of DEWP gels, multiple interactions are involved: the aggregation of DEWP powders in the dry state, the aggregation of DEWP solutions in the water state, and the subsequent gelling process of DEWP gels. The methods included analyses of zeta-potentials, surface hydrophobicity, reducing and nonreducing SDS-PAGE, sulfhydryl (SH) group content, molecular forces, particle size, and critical gel concentration. The results indicated that dry heat promoted the electrostatic and hydrophobic interactions in DEWP and DEWP aggregates. Disulfide (SS) bonds dominated the aggregation process of DEWP solutions in the water state, while hydrophobic and electrostatic interactions dominated the gel forming process. This phenomenon became even more obvious with a longer dry heat time. Furthermore, the intensified molecular interactions induced by dry heat resulted in the formation of smaller gel particles, and a relatively lower protein concentration was required for gel formation. All these factors contributed to the ultimate linear and fine-stranded DEWP gel network, which is more favorable in food processing and application.

Encapsulation of catechin into nano-cyclodextrin-metal-organic frameworks: Preparation, characterization, and evaluation of storage stability and bioavailability.

This study, nanoscale α-, ß-, γ-cyclodextrin (CD)-metal-organic frameworks (MOFs) were successfully prepared using solvothermal assisted ultrasound method. CD-MOFs were used as nanocarriers to encapsulate catechin (CA), and their encapsulation capacities were evaluated. Encapsulation capacities of CD-MOFs to incorporate CA followed the order: ß-CD-MOFs > Î³-CD-MOFs > α-CD-MOFs. CA/CD-MOFs were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC). DSC and SEM results provided evidence for the formation of CA/CD-MOFs. XRD results indicated the new solid crystalline phases formed in CA/CD-MOFs complex. Results of FT-IR showed that CA was combined with CD-MOFs through hydrogen bonding and van der Waals forces. Current research demonstrated that encapsulation of CA within CD-MOFs provided it against light, oxygen and temperature. Moreover, encapsulation by CD-MOFs improved storage stability and bioavailability of CA. Thus, these CA/CD-MOFs have potential to be used as nutritional supplements and functional foods.

Development and characterization of chitosan/guar gum active packaging containing walnut green husk extract and its application on fresh-cut apple preservation.

The aim of this work was to develop active packaging film by using chitosan/guar gum (CG) film matrix and walnut green husk extract (WE), for preservation of fresh-cut apple. WE was used as cross-linking agent to improve physicochemical properties, and as active substances to enhance antioxidant activity of CG films. Fourier transform infrared spectroscopy and scanning electron microscopy results showed WE formed intermolecular hydrogen bond interactions with the film matrix, and microstructures of the film were more compact. With the increase of WE content (0-4 wt%), the mechanical properties of composite films were significantly enhanced, while permeability of water vapor and oxygen was significantly decreased (p < 0.05). When the amount of extract reached 4 wt%, the DPPH radical scavenging activity of composite film was significantly increased to 94.59%. CG-WE and CG films were used as active packaging materials to preserve fresh-cut apple. When stored at 4 °C for 10 days, CG-WE films showed better performance in reducing firmness, weight loss, total soluble solids and inhibiting browning and microbial growth of fresh-cut apples. Therefore, as a new type of active food packaging material, CG-WE films have good physical properties, and great potential in ensuring food quality and extending shelf life.

Fabrication and digestive characteristics of high internal phase Pickering emulsions stabilized by ovalbumin-pectin complexes for improving the stability and bioaccessibility of curcumin.

In this study, ovalbumin (OVA) interacted with pectin (PE) to form soluble electrostatic complexes to improve the functional properties of high internal phase Pickering emulsions (HIPEs) under extreme conditions. The results showed that the stability of the OVA-PE soluble complexes-stabilized HIPEs was significantly better than that of the free OVA-stabilized HIPEs and was modulated by the biopolymer ratio. In particular, the complexes at an OVA:PE ratio of 1:1 (C-1:1) may form particulates with a core-shell structure by a flocculation mechanism. The C-1:1-stabilized HIPEs had the smallest oil droplet size (11.34 ± 1.14 µm) and the best resistance to extreme environmental stresses due to their strong, rigid structure and dense interfacial architecture. The in vitro digestion results showed that the bioaccessibility (from 18.3% ± 0.5% to 38.8% ± 4.8%) of curcumin improved with increasing PE content. Our work is helpful in understanding OVA-PE complexes as stabilizers for HIPEs and their potential applications in food delivery systems.

Inhibiting effect of dry heat on the heat-induced aggregation of egg white protein.

This study investigated the effect of dry heat on the aggregation characteristics of egg white protein (EWP) solutions. Turbidity and size-exclusion chromatography (SEC) results showed that dry heat hindered the subsequent bulk aggregation of dry heated EWP (DEWP) in aqueous solutions. A similar trend was also found in the particle size distribution of DEWP aggregates, where longer dry heating times resulted in smaller size distributions. Transmission electron microscopy (TEM) observations showed that native EWP tended to form bulk aggregates when heated in aqueous solutions, while DEWP aggregates presented linear and chain-like morphology. The α-helices of DEWP aggregates were converted to ß-sheets, and more chromogenic amino acids and hydrophobic groups were exposed owing to dry heat. Heat-induced aggregation of DEWP in water is more intense than that induced only by dry heat, but the hydrothermal aggregates with longer dry heating times were smaller in size and molecular weight.

Chemical Composition, Antibacterial, Antioxidant and Enzyme Inhibitory Activities of the Essential Oil from Leaves of Psidium guajava L.

Guava (Psidium guajava L.) leaf essential oil (GLEO) was extracted by water distillation, and its in vitro antioxidant, antidiabetic, and antibacterial properties were evaluated. Using GC/MS to determine the chemical components of GLEO, 27 constituents were identified, accounting for 74.90 % of the total oil content, among which L-caryophyllene (24.46 %), L-calamenene (10.82 %), (-)-globulol (10.69 %), and α-copaene (8.71 %) were the main components. Subsequently, the antioxidant activity of GLEO was determined by DPPH, ABTS, and ß-carotene bleaching tests. The half maximal inhibitory concentration of GLEO for three free radicals were IC50 =17.66±0.07 µg/mL, IC50 =19.28±0.03 µg/mL, and IC50 =3.17±0.01 µg/mL, respectively. Moreover, GLEO exhibited remarkable α-amylase (IC50 =13.99±0.34 µg/mL) and α-glucosidase (IC50 =5.50±1.02 µg/mL) inhibitory activities. It was effective against Streptomyces acidiscabies (MIC=1.25 µg/mL), Ralstonia solanacearum (MIC=5 µg/mL), and Erwinia carotovora subsp carotovora borgey (MIC=2.5 µg/mL), showing significant antibacterial properties. Based on the findings, given the high biological activity of GLEO, it is a biological preservative for food, medicine, and cosmetics and is valuable in natural therapy and crop disease management.

Preparation and Characterization of Chitosan Films Containing Lychee (Litchi chinensis Sonn.) Pericarp Powder and Their Application as Active Food Packaging.

In this study, lychee (Litchi chinensis Sonn.) pericarp powder was added to chitosan (CHS) matrix to develop active packaging films, and their structure, physicochemical, antibacterial, antioxidant, and functional properties were investigated. FT-IR results showed that intermolecular hydrogen bonds were formed between CHS and polyphenols in lychee pericarp powder (LPP), and the intermolecular interaction interfered with the assembly of CHS into semi-crystal structure, which reduced the crystallinity of CHS film. Incorporation of LPP significantly reduced water vapor permeability, water solubility, swelling degree, and elongation at break of CHS film (p < 0.05). However, UV-visible light barrier, tensile strength, and antibacterial and antioxidant properties of CHS films were increased by LPP incorporation. CHS-LPP film remarkably lowered the weight loss, firmness, titratable acidity, and total soluble solids of fresh-cut apple after five days storage. CHS-LPP film packaging effectively inhibited the browning of fresh-cut apple and the reduction of polyphenol content in apple juice caused by polyphenol oxidase (PPO)-mediated oxidation during storage. Therefore, CHS-LPP films have great potential as food packaging material to ensure the quality and extend the shelf life of food products.

Analysis of Sour Porridge Microbiota and Improvement of Cooking Quality via Pure Culture Fermentation Using Lacticaseibacillus paracasei Strain SZ02.

The microbial composition of sour porridge at different fermentation times was analyzed through high-throughput sequencing, and a pure culture fermentation process was established to optimize production process and improve the edible quality of the porridge. In natural fermentation, Firmicutes and Proteobacteria were abundant throughout the process. Specifically, Aeromonas, Acinetobacter, and Klebsiella were dominant on fermentation days 1-5 (groups NF-1, NF-3, and NF-5), while Lactobacillus and Acetobacter gradually became the dominant bacteria on fermentation day 7 (group NF-7). Further, we isolated one strain of acid-producing bacteria from sour porridge, identified as Lacticaseibacillus paracasei by 16SrRNA sequencing and annotated as strain SZ02. Pure culture fermentation using this strain significantly increased the relative starch and amylose contents of the porridge, while decreasing the lipid, protein, and ash contents (P < 0.05). These findings suggest that sour porridge produced using strain SZ02 has superior edible qualities and this strategy may be exploited for its industrial production.